Showing all 17 results
-
3-Piece Yellow PVC Rainsuit with Fire Resistant Coating
0It’s just like the regular PVC rain suit, except FANCY, and by fancy, we mean FR Coated.
• Jacket and bib material is wind & waterproof
• Jacket has a vented back so you don’t get too hot
• Detachable snap hood
• Bib pant has adjustable shoulder straps
• Cut for comfort in the seat
• Snap fly
• Meets CGSB standard 155.20.2000 for flame resistance
• *CFIA accepted for use with food contact -
Fire Resistant (FR) 5-Point Tear-away Hi Vis Safety Vest
0Class 2 Level 2 – CSA Z96-15
• FR treated 100% polyester mesh
• Meets EN ISO 14116 Index 1
• Meets CSA Z96-15 Class 2 Level 2
• This garment should be worn over a FR long-sleeved garment
• Retroreflective tape in 4″ contrast fluorescent configuration
• 5 point tear-away
• Extra-strong edging tape
• D-ring access slot
• 3 inches of adjustable size in the front
• This garment is constructed from flame-resistant fabrics and components, resists ignition and will not continue to burn when removed from the ignition source. Designed for continuous wear.Please read care instructions carefully before using any FR garment.
-
Fire Resistant (FR) Cotton Duck Hi Vis Safety Vest
0Class 2 Level FR – CSA Z96-15
• 100% FR treated preshrunk 10 oz.(350 gsm) cotton duck
• Meets: HRC 2- APTV 12 Cal/cm
• CSA Z96-15 Class 1 Level FR
• CAN/CGSB-155.20-2000
• NFPA2112
• TPP(with spacer) 10.4 Cal/cm Average
•TPP(contact test) 8.3 Cal/cm Average
• This garment should be worn over a FR long-sleeved garment
• Retroreflective tape in 4″ contrast fluorescent configuration
• Double snap adjustable front closure
• 2 inner, 2 outer, 1 cell phone and multiple pen slots pockets
• D-ring access slot
• Double radio clip tabs
• This garment is constructed from flame-resistant fabrics and components, resists ignition and will not continue to burn when removed from the ignition source. Designed for continuous wear.Please read care instructions carefully before using any FR garment.
-
Fire Resistant 3/4 Length Rain Coat
0Fire Resistant 3/4 Length Rain Coat
0.35MM PVC/POLY/PVC
100% WaterproofJACKET
• Detachable hood
• Front zip closure
• Snap closure flap
• Snap cuffs
• Vented back
• Welded seams -
FR Flame & Arc Resistant Long Sleeve Tee Shirt HRC2
0Class 1 Level FR – CSA Z96-15
This tee is is constructed from flame-resistant fabrics and components. It resists ignition and will not continue to burn when removed from the ignition source.
• 100% FR treated 7 oz./yd² (240 gsm) cotton Interlock
• 4” (10cm) Flame-resistant Retro-reflective safety tape
• Sewn with aramid thread
• Preshrunk fabric
• Chest pocket
• Soft finish for comfort
• 100% Polyester FR threadMEETS:
• HRC 2-APTV 8.5 Cal/cm²
• CSA Z96-09 Class 1, Level FR
• Can/CGSB-155.20-2000
• TPP (with spacer) 9.5 Cal/cm² average
• TPP (contact test) 8.5 Cal/cm² average -
FR Hoodie, with Detachable Hood
0Class 2 Level FR – CSA Z96-15
Need a flame resistant garment that will keep you warm and visible? Look no further. Encompassing all FR standards this hoodie will ensure you are safe, comfortable and compliant.
• Meets CGSB 155.20, 2000
• HRC2
• Arc rating:atpv =20.9 cal/cm2
• ASTM F1506 and NFPA 70E
• Material meets the requirements of NFPA2112-2012 ULcertified
• 100 % cotton 12 oz. fr treated fabric
• Aramid high tenacity FR thread
• Bar-tacked at all stress points
• Adjustable drawstring around hood
• One-way #5 resin zipper on aramid tape
• FR rib knit cuff & waistband
• Removable snap hood
• FR silver retroreflective tape -
FR Treated 100% Cotton Coverall with Reflective Tape
0Class 1 Level FR – CSA Z96-15
• Hazard/Risk Category (HRC) 2
• Arc Thermal Protective Value (ATPV) 12.5 cal/cm2
• CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
• Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2
• ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
• NFPA 70E (Standard for electrical safety in workplace)
• 100% 10 oz. Pre-shrunk Cotton, FR treated, twill weave
• 100% Polyester FR thread
• Heavy duty # 5 FR brass zipper on aramid tape
• 2″ FR retroreflective tape in CSA configuration
• Double needle stitching on reflective tape
• Bar-tacked at all stress points
• All metal thermally protected from the skin
• Protective shirt collar
• Storm guard over front zipper with snap closure
• Action back for mobility and elasticized waist sides
• Adjustable wrists and ankles
• 1 flap chest patch pocket on right, with YKK snap closure
• 2 waist patch pockets with side access
• 2 rear hip patch pockets
• Tool pocket on right leg -
Hi Vis Fire Resistant Long Rain Coat
0FEATURES:
• 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 4” Heat transfer reflective stripes with contrast on front and back body with 360˚armband
• Waterproof, heat-sealed with welded seams
• Vented underarms, adjustable cuff tab
• Fold away hood with adjustable drawstring
• Front plastic snaps closure
• Two flap pockets on the frontMeets:
CAN/CGSB 155.20 – 2000 Type 3
ASTM D6413 / D6413M
CSA Z96-15 Class 2 Level 2
Class 2 Level FR -
High Visibility Fire Resistant Rain Jacket
0• 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 4” Heat transfer reflective tape with contrast fluorescent configuration
• Waterproof, heat sealed with welded seams
• Vented underarms, elastic storm cuffs
• Fold away hood with visor
• Adjustable drawstring on hood
• Front zipper closure and storm flap
• 2 Front snap pockets
• Inner cell phone pocket
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• CSA Z96-15 Class 2 Level 2
• Class 2 Level FR -
High Visibility Fire Resistant Rain Pant
0• 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance • 4” Heat transfer reflective tape with contrast fluorescent configuration
• water-resistant (up to 8000mm), heat-sealed with welded seams
• Bib pants with adjustable elastic suspenders
• Quick-release Delrin clip
• Knee Patch
• Adjustable ankle gusset with extended pants cuff
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• Item meets CSA Z96-15 Class 3 Level 2
when worn with a CSA Z96-15 Class 2 Level 2 upper garment that includes Reflective armbands -
Leather Welding Jacket
0• Sidesplit cowhide
• Riveted Kevlar-sewn seams
• Reinforced snap front
• Inside pocket
• Adjustable snap cuffs -
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Jacket with Snap-Off Hood
0Class 2 Level FR – CSA Z96-15
Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a water-resistant (up to 8000mm) rain jacket that meets CGSB fire resistance and CSA hi-vis standards.
Features:
• 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 2″ Heat transfer reflective stripes on front and back
• Water-resistant (up to 8000mm), heat sealed with welded seams
• Vented underarms, elastic storm cuffs
• Fold away hood with visor
• Adjustable drawstring on hood
• Front zipper closure and storm flap
• 2 Front snap pockets
• Inner cell phone pocket
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• CSA Z96-15 Class 2 Level 2 (Class 3 Level 2 when worn together with the bib overalls)
• Class 2 Level FR -
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Jacket with Snap-Off Hood
0Class 2 Level FR – CSA Z96-15
Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a water-resistant (up to 8000mm) rain jacket that meets CGSB fire resistance and CSA hi-vis standards.
Features:
• 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 2″ Heat transfer reflective stripes on front and back
• Water-resistant (up to 8000mm), heat sealed with welded seams
• Vented underarms, elastic storm cuffs
• Fold away hood with visor
• Adjustable drawstring on hood
• Front zipper closure and storm flap
• 2 Front snap pockets
• Inner cell phone pocket
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• CSA Z96-15 Class 2 Level 2 (Class 3 Level 2 when worn together with the bib overalls)
• Class 2 Level FR -
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Overalls
0Class 2 Level FR – CSA Z96-15
The bib overalls to accompany the most functional garment.Features:
• 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 2″ Heat transfer reflective stripes on legs
• Water-resistant (up to 8000mm), heat-sealed with welded seams
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• CSA Z96-15 Class 3 Level 2 when worn together with the rain jacket
• Class 2 Level FR -
Lightweight Fire Resistant (FR) Hi Vis Safety Rain Overalls
0Class 2 Level FR – CSA Z96-15
The bib overalls to accompany the most functional garment.
Features:
• 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance
• 2″ Heat transfer reflective stripes on legs
• Water-resistant (up to 8000mm), heat-sealed with welded seams
• CAN/CGSB 155.20 – 2000 Type 3
• ASTM D6413 / D6413M
• CSA Z96-15 Class 3 Level 2 when worn together with the rain jacket
• Class 2 Level FR -
MCR Safety Welding Waist Apron 24″x18″
0MCR Safety Welding Leather Welding Apparel, Gray Select Split Cow Leather, Sewn With DuPont™ Kevlar®, Waist Apron measures 24 Inches x 18 Inches. When the heat is on and the sparks are flyin’, this Heavy Side-split leather offers outstanding protection from heat, sparks, slag, and cuts. Keep yourself safe! Hold it together! Stay safe with MCR Safety Welding.
• Double lock stitched, Sewn with DuPont™ Kevlar®
• MCR Safety Welding logo
• Select gray split cow leather
• Adjustable straps
• Waist Apron measures 24 Inches x 18 Inches -
Orange FR Treated 100% Cotton Coverall with Reflective Tape
0Class 1 Level FR – CSA Z96-15
• Hazard/Risk Category (HRC) 2
• Arc Thermal Protective Value (ATPV) 12.5 cal/cm2
• CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
• Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2
• ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
• NFPA 70E (Standard for electrical safety in workplace)
• 100% 10 oz. Pre-shrunk Cotton, FR treated, twill weave
• 100% Polyester FR thread
• Heavy duty # 5 FR brass zipper on aramid tape
• 2″ FR retroreflective tape in CSA configuration
• Double needle stitching on reflective tape
• Bar-tacked at all stress points
• All metal thermally protected from the skin
• Protective shirt collar
• Storm guard over front zipper with snap closure
• Action back for mobility and elasticized waist sides
• Adjustable wrists and ankles
• 1 flap chest patch pocket on right, with YKK snap closure
• 2 waist patch pockets with side access
• 2 rear hip patch pockets
• Tool pocket on right leg
